Mac G3 Boot Speed (Fast)

40 seconds boot time for this hoary 2001 estimator with 120mb of soul....

Power Mac G5 for editing EX3 footage - The Digital Video

Ofer, your determination needs to also permit the apply of Sony's EX3 utilities and also importantly visual communication editing tally that you intend to take in.

Sony's XDCAM EX Browser 2.0.1 states the following lower limit requirements:
OS: OS X 10.4.10 or later, sooner 10.5.6
MAINFRAME: Intel Inwardness 2 Musical composition 1GHz or higher PRE-EMINENCE no PPC!
Memory: 1 GB or more advisable

Also aura that Apple's Big Cat OS 10.6 imputable be released this summer legal document not transmute PPC's. So as you look wholly application code upgrades module be requiring Intel machines.

Sony's XDCAM Transfer 2.8 states the following smallest requirements:
PowerPC G5 2GHz, Intel Burden 2 Twosome, Intel Xeon 2GHz or higher
1GB or more of memory
Raincoat OS 10.4.11 or later, rather 10.5.6
Movie Pro 6.0.2 or later, rather 6.0.5

I ready-made the conversion from a PPC G5 Quad to a MacPro Intel 3.2 Octo a year ago and have not looked back. I ready-made the change knowing that I would purchase my EX3 last October. I recommend at least 8GB of RAM lower limit and rather 16GB for video recording editing. The MacPro's can also accommodate four SATA II hard drives internally. Budget for lots of hard drive space as video recording projects official document apply much more space that the EX3 footage. If you intend on doing Blu-ray authoring, also budget for a beefy recording card.

So right off the bat, you need an Intel machine for Sony's Clip Browser, more RAM at least 4GB for FCP and sooner 8GB, as well as a second hard drive. First rule of thumb in telecasting editing is have a dedicated hard drive for recording editing clips/projects. The PPC G5 internal hard drives are also limited to SATA I speeds.

Hope this help, cheers!